Part Number: 1002501
Enquire about this product:
Details: Angle seat valve
Design structurePoppet valve with spring return
Type of actuationpneumatic
Sealing principlesoft
Assembly positionAny
Mounting typeLine installation
Process valve connectionG1/2
Nominal diameter DN15
Valve function2/2 closed, monostable
Flow directionnon reversible
Operating pressure16 bar
Nominal pressure of process valve16
Exhaust-air functionnot throttleable
Type of resetmechanical spring
Type of pilotingWith external control
Auxiliary pilot air port 12G1/8
Pilot pressure4 ... 10 bar
Pilot mediumCompressed air in accordance with ISO8573-1:2010 [7:4:4]
MediumMineral oil-based hydraulic oil
Operating medium, process valveMineral oil-based hydraulic oil
Max. viscosity600 mm2/s
Medium temperature-10 ... 80 °C
Ambient temperature10 ... 60 °C
Flow rate Kv2.8 m3/h
Standard nominal flow rate3,000 l/min
Switching time on100 ms
Switching time off310 ms
Materials noteConforms to RoHS
Materials information, housingGunmetal (red brass)
Material number for housingCC499K
Notes on materials for drive headBrass
Materials information for sealsNBR
Product weight1,200 g
Corrosion resistance classification CRC1
Located in: Festo

Latest News

FIPA presents: Oval vacuum cups

Introducing the newly developed oval vacuum cups series.

The vacuum cups are characterised by a very long cycle life, which has also been successfully demonstrated against vacuum cups of competitors in practical operation. The long service life is enabled by means of a new high wear- and oil-resistant NBR material and a special vacuum suction cup construction which minimises the load on the vacuum cup during handling.


FIPA presents: New ID grippers for parts with different diameters

Flexible and service friendly

The pneumatically operated, single-acting ID grippers from FIPA GmbH have already established themselves as the alternative for workpieces with holes or cut-outs or for when vacuum cups or grippers aren’t just right for handling goods. FIPA has completely overhauled its portfolio and now offers users maximum flexibility with minimal set-up time.

The small ID grippers are now equipped with food-safe gripper heads made of polyamide (PA) and are suitable for light and small parts with openings measuring 3 to 10 millimeters in size. If necessary, the gripper heads can be easily exchanged in a non-destructive manner.