Part Number: 1132942
Enquire about this product:
Details: Parallel gripper
Stroke per gripper jaw6 mm
Max. replacement accuracy<= 0.2 mm
Max. angular gripper jaw backlash ax,ay<= 0.1 deg
Max. gripper jaw backlash Sz<= 0.02 mm
Rotationally symmetrical<= 0.2 mm
Repetition accuracy, gripper<= 0.04 mm
Number of gripper fingers2
Assembly positionAny
Mode of operationdouble-acting
Gripper functionParallel
Design structureguided motion sequence
Position detectionFor proximity sensor
Total force at 6 bar, opening288 N
Total force at 6 bar, closing266 N
Operating pressure3 ... 8 bar
Operating pressure, sealing air0 ... 0.5 bar
Max. operating frequency of gripper<= 3 Hz
Min. opening time at 6 bar29 ms
Min. closing time at 6 bar35 ms
Operating mediumCompressed air in accordance with ISO8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (subsequently required for further operation)
Corrosion resistance classification CRC2
Ambient temperature5 ... 60 °C
Gripping force per gripper jaw at 6 bar, opening144 N
Gripping force per gripper jaw at 6 bar, closing133 N
Mass moment of inertia1.32 kgcm2
Max. force on gripper jaw Fz static500 N
Max. torque at gripper Mx static30 Nm
Max. torque at gripper My static25 Nm
Max. torque at gripper Mz static15 Nm
Lubrication interval for guide components5,000,000 Mio SP
Product weight327 g
Mounting typeWith internal thread and dowel pin
Pneumatic connection, sealing airM5
Pneumatic connectionM5
Materials noteConforms to RoHS
Materials information for cover capHigh alloy steel, non-corrosive
Materials information, housingAnodised
Materials information for gripper jawsHardened
Located in: Festo

Latest News

FIPA presents: Oval vacuum cups

Introducing the newly developed oval vacuum cups series.

The vacuum cups are characterised by a very long cycle life, which has also been successfully demonstrated against vacuum cups of competitors in practical operation. The long service life is enabled by means of a new high wear- and oil-resistant NBR material and a special vacuum suction cup construction which minimises the load on the vacuum cup during handling.


FIPA presents: New ID grippers for parts with different diameters

Flexible and service friendly

The pneumatically operated, single-acting ID grippers from FIPA GmbH have already established themselves as the alternative for workpieces with holes or cut-outs or for when vacuum cups or grippers aren’t just right for handling goods. FIPA has completely overhauled its portfolio and now offers users maximum flexibility with minimal set-up time.

The small ID grippers are now equipped with food-safe gripper heads made of polyamide (PA) and are suitable for light and small parts with openings measuring 3 to 10 millimeters in size. If necessary, the gripper heads can be easily exchanged in a non-destructive manner.