Model T9000 Electro-Pneumatic Pressure Controller

Enquire about this product:
Details:

The Model T9000 Series Pressure Controllers have a closed-loop, integrated, microprocessor control system that regulates outlet pressure. You can control the output from the Model T9000 products using the keypad or from an analog control signal. You can control the output from the Model T9000D using the keypad and through DeviceNet™ Communication network.

Common Features

  • Fully functional keypad and display.
  • Backlit Liquid Crystal display screen.
  • Output pressure displays in psig, BAR, kPa, or user-defined pressure units.
  • Seven input signal ranges cover all standard inputs.
  • Reverse acting capability for analog input and output signals.
  • Select Current or Voltage mode for input signal or optional analog channels using the keypad.
  • RFI/EMI protection eliminates electromagnetic and radio interference.

Operating Principles

The Feed and Bleed Solenoid Valves control pressure in the Signal Chamber of the Booster Section. A pressure sensor measures the outlet pressure and provides a feedback signal to the Electronics Section. Any variation in pressure between the setpoint and the outlet pressure activates the Feed and Bleed Solenoid Valves to correct the output pressure.

Specifications:

See the Catalogue Pages for full Specification including associated approvals.

Catalogue PDF: application/pdf
Located in: Transducers

Latest News

FIPA presents: Oval vacuum cups

Introducing the newly developed oval vacuum cups series.

The vacuum cups are characterised by a very long cycle life, which has also been successfully demonstrated against vacuum cups of competitors in practical operation. The long service life is enabled by means of a new high wear- and oil-resistant NBR material and a special vacuum suction cup construction which minimises the load on the vacuum cup during handling.

Read more...

FIPA presents: New ID grippers for parts with different diameters

Flexible and service friendly

The pneumatically operated, single-acting ID grippers from FIPA GmbH have already established themselves as the alternative for workpieces with holes or cut-outs or for when vacuum cups or grippers aren’t just right for handling goods. FIPA has completely overhauled its portfolio and now offers users maximum flexibility with minimal set-up time.

The small ID grippers are now equipped with food-safe gripper heads made of polyamide (PA) and are suitable for light and small parts with openings measuring 3 to 10 millimeters in size. If necessary, the gripper heads can be easily exchanged in a non-destructive manner.

Read more...