Part Number: 1132945
Enquire about this product:
Details: Parallel gripper
Specifications: Size  35  Stroke per gripper jaw  8 mm  Max. replacement accuracy  <= 0.2 mm  Max. angular gripper jaw backlash ax,ay  <= 0.1 deg  Max. gripper jaw backlash Sz  <= 0.02 mm  Rotationally symmetrical  <= 0.2 mm  Repetition accuracy, gripper  <= 0.05 mm  Number of gripper fingers  2  Assembly position  Any  Mode of operation  double-acting  Gripper function  Parallel  Design structure  Inclined plane  guided motion sequence Position detection  For proximity sensor  Total force at 6 bar, opening  581 N  Total force at 6 bar, closing  534 N  Operating pressure  3 ... 8 bar  Operating pressure, sealing air  0 ... 0.5 bar  Max. operating frequency of gripper  <= 3 Hz  Min. opening time at 6 bar  33 ms  Min. closing time at 6 bar  37 ms  Operating medium  Compressed air in accordance with ISO8573-1:2010 [7:4:4]  Note on operating and pilot medium  Lubricated operation possible (subsequently required for further operation)  Corrosion resistance classification CRC  2  Ambient temperature  5 ... 60 °C  Gripping force per gripper jaw at 6 bar, opening  291 N  Gripping force per gripper jaw at 6 bar, closing  267 N  Mass moment of inertia  3.56 kgcm2  Max. force on gripper jaw Fz static  750 N  Max. torque at gripper Mx static  40 Nm  Max. torque at gripper My static  30 Nm  Max. torque at gripper Mz static  25 Nm  Lubrication interval for guide components  5,000,000 Mio SP  Product weight  572 g  Mounting type  Optional  Internal thread and centring sleeve With through-hole and centring sleeve With through-hole and dowel pin With internal thread and dowel pin Pneumatic connection, sealing air  M5  Pneumatic connection  M5  Materials note  Free of copper and PTFE  Conforms to RoHS Materials information for cover cap  High alloy steel, non-corrosive  Materials information, housing  Aluminium  Anodised Materials information for gripper jaws  Steel  Hardened
Located in: Festo

Latest News

FIPA presents: Oval vacuum cups

Introducing the newly developed oval vacuum cups series.

The vacuum cups are characterised by a very long cycle life, which has also been successfully demonstrated against vacuum cups of competitors in practical operation. The long service life is enabled by means of a new high wear- and oil-resistant NBR material and a special vacuum suction cup construction which minimises the load on the vacuum cup during handling.


FIPA presents: New ID grippers for parts with different diameters

Flexible and service friendly

The pneumatically operated, single-acting ID grippers from FIPA GmbH have already established themselves as the alternative for workpieces with holes or cut-outs or for when vacuum cups or grippers aren’t just right for handling goods. FIPA has completely overhauled its portfolio and now offers users maximum flexibility with minimal set-up time.

The small ID grippers are now equipped with food-safe gripper heads made of polyamide (PA) and are suitable for light and small parts with openings measuring 3 to 10 millimeters in size. If necessary, the gripper heads can be easily exchanged in a non-destructive manner.